- 3D printing
Martian - day 4
Now the shin was done, I needed to do the lower thigh.
![#](https://tribbeck.com/application/files/cache/thumbnails/0383f3786bcf0c6bb9b4c5f84449f3a0.png)
This isn't really a nice object to print sideways (which is the quickest), because it has a lot of overhangs. Because I was only printing one, I did do it sideways; vertical would've been twice as long, but due to a quirk in the printing process, two would not take much longer vertically than one.
![#](https://tribbeck.com/application/files/cache/thumbnails/b4a561bbabd373806d081196803b0e02.jpg)
![#](https://tribbeck.com/application/files/cache/thumbnails/be0e2f96ac5cb424e3cfb9c046abe083.jpg)
![#](https://tribbeck.com/application/files/cache/thumbnails/1c49a9c67bc2ba92cf84113d33887883.jpg)
![#](https://tribbeck.com/application/files/cache/thumbnails/adb019462c937f549e9ec00caf9eff22.jpg)
![#](https://tribbeck.com/application/files/cache/thumbnails/f4eaafa2a23e02dd1718e00addf57ce1.jpg)
Date last modified:
2019-10-20 15:44:35